FULLTANK
FULLTANK
FULLTANK
FULLTANK
FULLTANK

FULLTANK

FULLTANK – 240 Volt hydraulic swing gate drive (240 volts – 7.0 metres)

$1,896.00

In stock

Description

Manufactured by SEA in Italy the Full Tank is a 240 volt swing gate hydraulic operator. The use of hydraulics in swing gate motors has been around for many years with the motor, tank and pump all contained within the housing. As with all things hydraulic gate operators come in various levels of quality but given that hydraulics are essentially designed for demanding sites our attitude is that they need to be the best and no corners should be cut. To this end SEA is recognised as being in the top two manufacturers in the world of hydraulic gate motors and maintains high levels of quality by producing all vital components in house. Low side room is a feature of this operator needing as little as 100mm. The FULLTANK is a reversible operator with key operated manual override. The FULLTANK is suitable for gates to 7 metres wide and likes nothing better than a high duty cycle.

It is possible to use a variety of control boards to control the FULLTANK including the ATA CB6, DG240 and the D760. The suggested board is the LOGICSEADG240 which has thrust control to regulate the FULLTANK force and can be used as a one or two motor controller.

Specifications

Weight 15 kg
Motor Voltage

240 volts AC

Standby Current

0mA

Maximum Current

2.0A

Motor Power

220W

Maximum Thrust

6400Nm

Opening Time

20 seconds to 90 degrees

Maximum Gate Width

7000mm

Duty Cycle

70 operations per hour

Height (mm)

90mm

Width (mm)

99mm

Length (mm)

1270mm

Weight (kg)

12.0 Kg

IP Rating

IP55

FULLTANK installation manual

Download