HD80 Swing Automatic Gate Operator
The HD80 is the biggest automatic gate opener in our range. It is a hydraulic operator designed for high duty cycle commercial, industrial and residential electric driveway gates up to eight metres wide.


In stock


Manufactured by Beninca in Italy the HD80 is a 240 volt swing gate hydraulic operator. The use of hydraulics in swing gate motors has been around for many years with the motor, tank and pump all contained within the housing. As with all things hydraulic gate operators come in various levels of quality but given that hydraulics are essentially designed for demanding sites our attitude is that they need to be the best and no corners should be cut. To this end Beninca CAB is recognised as being in the top manufacturers in the world of hydraulic gate motors and maintains high levels of quality by producing all vital components in house. Low side room is a feature of this operator needing as little as 150mm. The HD80 is a reversible operator with key operated manual override. The HD80 is suitable for gates to eight metres wide and likes nothing better than a high duty cycle.

It is possible to use a variety of control boards to control the HD80 including the CB6 and the D770. The suggested board is the LOGICD770 which has thrust control to regulate the HD80 force and can be used as a one or two motor controller.

HD80 Brochure


HD80 Install Manual


Additional information

Weight 20 kg
Motor Voltage

240 volts AC

Standby Current


Maximum Current


Motor Power


Maximum Thrust

2500 da N

Opening Time

21 seconds to 90 degrees.

Maximum Gate Width

9000 mm

Duty Cycle

70 operations per hour

Height (mm)


Width (mm)


Length (mm)


Weight (kg)

18.0 Kg

IP Rating


You may also like…